1. Measure the actual gap

Measure the opening between the seat and console at the point where the organizer will sit. Check both front and rear edges. Seat upholstery, console trim and seat rails can change the usable space.

Record these details before choosing

This checklist records your layout; it does not calculate or certify vehicle fit. Keep the measurements with the exact product SKU you are considering.

Seat-and-console measurement checklist
CheckRecordHow to use it
Vehicle and placementRecord the vehicle model/year, driver or passenger side, and your normal seat position.A model name or an example installation photo alone does not establish compatibility.
Usable gapRecord the front and rear gap beside the seat in millimetres, including changes as the seat moves.Compare against the exact item's mounting section. A permitted gap range is not published for these listings.
Console supportNote whether the console is above, level with or below the seat, and whether the organizer can stay supported.The supplied 12 Series fit diagram excludes an unsupported low-console layout or a gap too large to hold the organizer securely.
Seat travel and controlsCheck the seat's normal travel, buckle access, adjustment controls and any nearby parking brake.Do not install where the organizer or cables interfere with controls, seat belts or airbag areas.
Mounting and cable spaceAsk for the exact mounting-section thickness, insertion depth and cable/power-lead route.Overall pocket dimensions do not supply these missing installation measurements.

What the 12 Series dimensions do—and do not—tell you

  • Length: 300 mm / 11.81 in, shown on the supplier's dimension diagram.
  • Pocket width: 78 mm / 3.07 in at the wider end; 70 mm / 2.76 in at the narrower end.
  • Overall height: 155 mm / 6.10 in, including the lower mounting section.

These figures are transcribed from the supplier's diagram, not independently measured. The 78/70 mm pocket width is not the required seat-gap width. The 155 mm overall height includes the lower mounting section; it does not give that section's thickness or usable insertion depth.

If the fit-critical measurements are still missing, ask support with your recorded layout and the listing SKU before ordering. Compare the three organizer models and their documented gaps.

2. Move the seat through its normal range

Try your driving and passenger positions before choosing a fixed organizer. Leave clearance for the seat belt buckle, adjustment controls and airbag areas. Do not install an accessory where it could interfere with vehicle controls.

3. Decide what needs to live there

For a phone, wallet and small items, an open storage pocket may be enough. If cable clutter is the main issue, compare models with a lower cable compartment or a separate retractable charger.

4. Compare the organizer families

These are observations from the supplied product-family images, not a specification or promise about every variant.

ModelWhat the images showCheck before choosing
12 SeriesAn open storage pocket, visible charging panel and lower cable area.Gap width, buckle clearance, connector set and power source.
36 SeriesAn orange-accent organizer beside a front seat.Exact accessories and whether the selected variant includes charging hardware.
ClassicA storage pocket, charging panel and vehicle power lead.Gap fit, cable routing and exact charging configuration.

5. Check power and device compatibility

For charging models, verify your car socket or power source, the connector types on the exact SKU, and the charging requirements of each device. A product image is not a substitute for an electrical specification sheet.

6. Confirm the exact variant before checkout

Product families can differ in color, ports and accessories. Match the selected variant to the final listing and confirm price, shipping destination and returns terms before placing your order.

Ready to compare?

Explore seat-gap organizers and in-car charging accessories in the collection.

Browse products ↗